Latest Covid-19 Ordering, Delivery & Service status updates here.

Dulux Aquashield Pre Treatment Coat

Size
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage ≈|110-112|m²/L
  • Drying Time 4-6 hours
  • Coats 1
Product Features
  • FungiClean Technology
  • AntiMicrobial Pack
  • Surface Prep Wash

Product Description

Dulux Aquashield Pre Treatment Coat is a high performance surface preparation product with FungiClean Technology that provides protection against fungal attacks. Its unique Anti Microbial pack helps to destroy the fungal and algal infection from the root to prevent fungal and algal growth developing on the surface.

Health & Safety

Flammable. In case of fire use foam, dry powder, AFFF, CO2 fire extinguisher. Never use water. No smoking. Keep out of reach of children. Keep away from sources of ignition. Keep container tightly closed and upright to prevent leakage when not in use. Work only in areas of good ventilation. Inside always keep doors and windows fully open during application and drying. Irritating to eyes and skin. Contains COBALT CARBOXYLATE, May produce an allergic reaction. When applying paint it is advisable to wear eye protection. In case of contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Repeated exposure may cause skin dryness or cracking. Wear gloves while working. In case of contact with skin, use soap and water or a recognized skin cleaner. Use suitable respiratory equipment while applying paint in narrow spaces. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. In case of insufficient ventilation during spraying wear suitable respiratory equipment, a suitable cartridge mask should be worn provided the filter is changed regularly. All respiratory equipment must meet an appropriate approved standard. Do not breathe vapour or sanding dust. If inhalation causes physical discomfort move to fresh air. If discomfort persists or any breathing difficulty occurs, move to fresh air and seek medical advice by showing container label. Harmful if swallowed, seek medical advice immediately. Care must be taken when transporting paint. Keep container tightly closed and upright to prevent leakage when not in use. Store in a cool and dry place. In the event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses. Very toxic to aquatic organisms. May cause long term adverse effects in the aquatic environment. Dispose off any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. This container is only for paint use CONTAINS NO ADDED LEAD OR MERCURY
  • pre_treatment_coat.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Remove any fungal, algal lichen or moss growth by scrapping with wire brush. Clena the surface thoroughly for any any powdery loose particles by brushing and water jetting. Allow the surface to dry completely. For best performance, all existing coatings where old fungal/algal growth may have been trapped, should be scrapped.
  • 2. Cleaning
    Clean all equipment with water immediately after use
  • 3. Storing
    Store paint in dry conditions and protect from extreme temperatures.