Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Connect with email
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Forgotten your password?
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
If you have concerns about your privacy?
Read our Privacy Policy.

Paintex Ultraprime
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt
-
Coverage 10-12 m2/L
-
Drying Time 16 Hours between coats
-
Coats 2
-
High Quality Solvent Based Sealer
-
Reduces Damage From Alkali and Salts
-
No Added Lead or Mercury
Product Description
Paintex Ultraprime is a high quality solvent based sealer for masonry surfaces. It is ideal for use on all interior/exterior surfaces. It reduces damage from alkali and salts and seals powdery, porous surfaces. It provides excellent adhesion with the surface and top coats.
Application Description
Apply 1 coats of Paintex Ultraprime and dry overnight
Health & Safety
Highly flammable. Harmful by inhalation & in contact with skin. Keep out of reach of children. Do not breath solvent vapour/spray. Keep container in a well-ventilated place. Irritating to eyes, respiratory system & skin. Keep away from food, drink & animal feeding stuff. Contains Aromatic & Aliphatic solvents. Wear suitable protective clothing & gloves. Avoid contact with eyes and skin. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. Keep away from sources of ignition. No smoking. Take precautionary measures against static discharges. Wear suitable protective equipment during sanding. Dry sanding of the dry paint film will give rise to paint and wooden dust, such type of surfaces should be sanded with wet sanding paper. If swallowed, rinse mouth with water (only if the person is conscious) & show this container or label to a medical practitioner. In case of fire use foam, dry powder, AFFF, CO2 never use water. Is very toxic to aquatic organisms and may cause long term adverse effects in the aquatic environment. Do not empty into drains. Dispose of any paint in accordance with the appropriate Environment Regulations. This container is only for paint use. Safety Data Sheet available for professional users on request
Tips & Advice
-
1. Preparing the SurfacesNew or Bare Surfaces: Surfaces must be clean, dry and free from efflorescent salts. Prime with Paintex Ultraprime
Previously Painted Sound Surfaces: Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper and dust off. Spot prime and fill surface if required.
Powdery, Dusty Surfaces, Cracks & Other Surface Defects: Remove all defective or poorly adhering material by rubbing down using a suitable adhesive paper or stiff brush and dust off. Treat any areas affected by mould, lichens or algae with bleach. For large holes and cracks, use sand and cement mixture. Allow to dry. Prime with Paintex Ultraprime -
2. CleaningClean all equipment with ICI Dulux Woodcare Special Thinner immediately after use
-
3. StoringStore in a cool, dry place
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator