Paintex Star Semi-Plastic Emulsion

Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 12-14 m2/L
  • Drying Time 2-3 Hours between coats
  • Coats 4
Product Features
  • Improved Hiding Power
  • Smooth Matt Finish
  • No Added Lead or Mercury

Product Description

ICI Paintex Star Emulsion is an economical emulsion with improved hiding power and a smooth matt finish. It is suitable for all normal interior masonry surfaces including brick work, plaster & cement etc.

Application Description

Apply 3-4 coats of Paintex Star Emulsion and leave for 2-3 hours between coats

Health & Safety

Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Lift with care – gross weight exceeds 10kg Wear eye/ hand protection. Do not breathe vapors/spray. Use only in well-ventilated areas. Remove as much paints as possible from brushes and rollers before cleaning. Avoid release to the environment. Collect spillage. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Do not empty into water course. Safety data sheet available for professional/ user on request. Hazard Statements May cause an allergic skin reaction. Toxic to aquatic life with long lasting effects. Precautionary Statements Keep out of reach of children. If medical advice is needed, have product container or label at hand. Do not get in eyes, on skin, or on clothing. Call a POISON CENTER or doctor if you feel unwell. Dispose of contents and container in accordance with all local, regional, national or international regulations.

Tips & Advice

  • 1. Preparing the Surfaces
    New or Bare Surfaces: Surfaces must be clean, dry and free from efflorescent salts. After priming with ICI Paintex Ultraprime, dry overnight and fill with surface with two coats of ICI Paintex Putty. Allow the putty to dry
    Previously Painted Sound Surfaces: Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper and dust off. Spot prime and fill surface as described above if required.
    Powdery, Dusty Surfaces, Cracks & Other Surface Defects: For large holes and cracks, use sand and cement mixture. Allow to dry. Prime surface, dry overnight and then fill any surface imperfections as described above. Allow to dry. Scuff surface using abrasive paper and dust off.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use
  • 3. Storing
    Store in a cool, dry place