Dulux Synthetic Undercoat Wood and Metal Primer

Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 11-13 m2/L
  • Drying Time 16 Hours between coats
  • Coats 1
Product Features
  • Seals Wood
  • Improves Adhesion with Top Coat
  • No Added Lead or Mercury

Product Description

Dulux Synthetic Undercoat is a high quality solvent based primer for all kinds of interior & exterior wood & metal surfaces. It protects the metal surface from rust & gives uniform appearance to topcoat; act as a sealant for wood surfaces to provide uniform appearance & adhesion with topcoat.

Application Description

Apply 2-3 coats of dulux Synthetic Undercoat and leave for 16 hours between coats

Health & Safety

Flammable. In case of fire use foam, dry powder, AFFF, CO2 fire extinguisher. Never use water. No smoking. Keep out of reach of children. Keep away from sources of ignition. Keep container tightly closed and upright to prevent leakage when not in use. Work only in areas of good ventilation. Inside always keep doors and windows fully open during application and drying. Irritating to eyes and skin. Contains COBALT CARBOXYLATE & METHYL ETHYL KETOXIME, May produce an allergic reaction. When applying paint it is advisable to wear eye protection. In case of contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Repeated exposure may cause skin dryness or cracking. Wear gloves while working. In case of contact with skin, use soap and water or a recognized skin cleaner. Use suitable respiratory equipment while applying paint in narrow spaces. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. In case of insufficient ventilation during spraying wear suitable respiratory equipment, a suitable cartridge mask should be worn provided the filter is changed regularly. All respiratory equipment must meet an appropriate approved standard. Do not breathe vapour or sanding dust. If inhalation causes physical discomfort move to fresh air. If discomfort persists or any breathing difficulty occurs, move to fresh air and seek medical advice by showing container label. Harmful if swallowed seek medical advice immediately. Care must be taken when transporting paint. Keep container tightly closed and upright to prevent leakage when not in use. Store in a cool and dry place. In the event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses. Very toxic to aquatic organisms. May cause long term adverse effects in the aquatic environment. Dispose of any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. This container is only for paint use. CONTAINS NO ADDED LEAD OR MERCURY

Tips & Advice

  • 1. Preparing the Surfaces
    New or Bare Surfaces (Wood and Metal):
    Wood surfaces must be clean, dry and free from rosin or grease, wax. Surfaces should be thoroughly rubbed down using the suitable abrasive paper along with the grains of wood. Dust off and wipe with petrol dampened cloth. Apply one coat of Dulux Synthetic undercoat. Dry overnight.
    Metal surfaces must be clean, dry, free from dirt, grease, wax etc. thoroughly rubbed down using the suitable abrasive paper. Dust off and wipe with petrol dampened cloth. Apply one coat of Dulux Synthetic undercoat. Dry overnight.

    Galvanized and aluminium Surfaces:
    On galvanized and aluminium surfaces should be cleaned and degreased. Then pretreat with etch primer to ensure good adhesion. Apply one coat of Dulux Synthetic undercoat. Dry overnight.

    Previously Painted Surface:
    Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Apply one coat of Dulux Synthetic undercoat. Dry overnight.
  • 2. Cleaning
    Clean all equipment with Mineral turpentine immediately after use
  • 3. Storing
    Store paint in dry conditions and protect from extreme temperatures.
Fetching the data, please wait...