Dulux Promise SmartChoice Exterior

Freshly Plastered surfaces must be allowed to cure completely. It is recommended to allow at least 28 days as the curing time for new masonry surfaces. Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Dry sanding, flame cutting and/or welding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. If after thoroughly cleaning the surface, the surface still exhibits chalkiness, the surface should be coated with Dulux Professional Weathershield Sealer E1000. For areas severely affected by algae or fungus application of Dulux Aquatech Pre-Treatment coat is recommended.

Clean all equipment with clean water immediately after use

Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.