Dulux Promise Interior Putty

Size
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 4-6m2/kg/coat
  • Drying Time 2-3 Hours between coats
  • Coats 2
Product Features
  • High Coverage
  • Comfortable Application

Product Description

Dulux Promise Putty (water based) is ready to use filler that has an excellent whiteness, coverage and application properties. Its high quality filling properties has made it ideal for use on all types of interior masonry surfaces. It provides a smooth base for top coat application of all Decorative products. Dulux Promise Putty is not recommended for exterior use.

Application Description

Apply 2 coats of Putty and leave for 2-3 hours between coats

Health & Safety

Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Lift with care – gross weight exceeds 10kg Wear eye/ hand protection. Do not breathe vapors/spray. Use only in well-ventilated areas. Remove as much paints as possible from brushes and rollers before cleaning. Avoid release to the environment. Collect spillage. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Do not empty into water course. Safety data sheet available for professional/ user on request.

Tips & Advice

  • 1. Preparing the Surfaces
    New or Bare Surfaces:
    Surfaces must be clean, dry and free from efflorescent salts. Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Treat any areas affected by mould, lichens, algae and moss with bleach. After priming new surfaces with Dulux Prime On, dry over night, fill the surface with Dulux wall putty. Allow the putty to dry for 3-4 hours.

    Previously Painted Surface:
    Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Spot prime and fill the surface as describe above if required.

    Powdery, Dusty and Cracked Surface:
    Make good minor defects. For larger holes and cracks, use sand and cement mixture. Allow the surface to dry. Prime the surface and then fill any surface imperfections with Dulux wall putty. Allow to dry for 3-4 hours. Scuff surface using abrasive paper and dust off.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use
  • 3. Storing
    Store in a cool, dry place