Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Connect with email
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Forgotten your password?
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
If you have concerns about your privacy?
Read our Privacy Policy.
No Colour Selected

Dulux Pentalite Emulsion
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt
-
Coverage 14-16 m2/L
-
Drying Time 2-3 Hours
-
Coats 3
-
High Coverage
-
Durable
Product Description
Dulux Pentalite Special Plastic Emulsion (Acrylic Based) is a premium quality emulsion with a smooth matt finish.
Application Description
Apply 3-4 coats of Dulux Pentalite Emulsion and leave for 3 hours between coats.
Health & Safety
Keep out of reach of children. Keep away from sources of ignition. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher. Never use water.Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. When applying paint it is advisable to wear eye protection and suitable gloves. In case of contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation. Repeated exposure may cause skin dryness or cracking. When using inside, always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. Harmful if swallowed; seek medical advice. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Do not breathe vapour or sanding dust as product is toxic by inhalation. If inhalation causes physical discomfort, move to fresh air. If discomfort persists or any breathing difficulty occurs, seek medical advice and show container label. Care must be taken when transporting paint. Do not store by hanging on a hook. Protect from extreme temperatures. Store in a cool and dry place. In an event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses as product is very toxic to aquatic organisms and may cause long term adverse effects in the aquatic environment. Dispose off any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. The container is only for paint use.
Tips & Advice
-
1. Preparing the SurfacesNew or Bare Surfaces:
New or bare surfaces must be clean, dry and free from efflorescent salts. Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Treat any areas affected by mould, lichens, algae and moss with bleach. After priming new surfaces with Dulux Prime On fill the surface with Dulux wall putty. Please refer to PDS of Dulux Prime On and Dulux wall putty for correct application procedure and drying time properties. For best results a single coat of Dulux Prime on over wall putty and dry overnight.
Previously Painted Surface:
Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Spot prime and fill the surface as describe above if required.
Powdery, dusty and cracked surface:
Make good minor defects. For larger holes and cracks use sand and cement mixture. Allow the surface to dry. Prime the surface and then fill any surface imperfections with Dulux wall putty. For best results a single coat of Dulux Prime on over wall putty and dry overnight. -
2. CleaningClean all equipment with clean water immediately after use.
-
3. StoringStore paint in dry conditions and protect from extreme temperatures.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator