• Find a colour
  • Choose a product
  • Ideas
  • Expert Help
  • Find a store
  • My Notes
  • My Account Login

    My Account

    • My Notes
    • Logout
    No account? Register here
    • My Notes
Clear
Filters Filters Reset filters

Dulux Interior Acrylic Putty

 
Excellent coverage and high durability

Dulux Interior Acrylic Putty
How much paint do I need?
Do you know the area?
  • Enter the height and the length of the surface you want to paint.
  • Height in metres ?
    Please enter a numeric value
  • Length in metres ?
    Please enter a numeric value
  • Great! Just add it below and find out how much you you'll need.
  • Area in square metres
    Please enter a numeric value
Your measurement
Height 
Length 
Area 
You will need

Based on 1 coats
This is an estimate based on 1 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Measure the height and lenght of the surface you want to paint (metres).
Length
Height
Ok let's start
Calculate again

Key Information

  • Finish Matt
  • Coverage 5 m²/kg
  • Drying Time Dependent on temperature and humidity. Recoat after 2-3 Hours.
  • Coats 1

Product Description

Dulux Interior Acrylic Putty (water based) is a ready to use filler that has an excellent whiteness, coverage and application properties.

Application Description

Apply 1-2 coats of Dulux Wall Smoothening Putty (water based) and leave for 2-3 hours between coats.

Health & safety

Hazard warnings

Keep out of reach of children. Keep away from sources of ignition. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher. Never use water.Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. When applying paint it is advisable to wear eye protection and suitable gloves. In case of contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation. Repeated exposure may cause skin dryness or cracking. When using inside, always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. Harmful if swallowed; seek medical advice. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Do not breathe vapour or sanding dust as product is toxic by inhalation. If inhalation causes physical discomfort, move to fresh air. If discomfort persists or any breathing difficulty occurs, seek medical advice and show container label. Care must be taken when transporting paint. Do not store by hanging on a hook. Protect from extreme temperatures. Store in a cool and dry place. In an event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses as product is very toxic to aquatic organisms and may cause long term adverse effects in the aquatic environment. Dispose off any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. The container is only for paint use.
  • Product Features
  • Tips & Advice
High Coverage
Comfortable Application

Tips & Advice

Preparing the Surfaces
New or Bare Surfaces: New surfaces must be clean, dry, free from all defective or poorly adhering material. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Treat any area affected by mould, lichens, algae or moss with bleach. After priming new surfaces with Dulux Prime On, dry over night, fill the surface with Dulux Wall Smoothening Putty. Allow the filler to dry for 2-3 hours and apply second coat of Putty. Third coat is not recommended for extra smoothness. Dulux Wall Smoothening Putty can also be applied directly on new unpainted surfaces. Third coat is recommended for extra smoothness. For best results apply one coat of prime-on again over wall putty and dry overnight. Previously Painted Surface: Remove all loose, defective paint and powdery residues by thorough brushing or scraping using a stiff fibre brush and dust off. Smooth surface with Dulux Wall Smoothening Putty as described above if required. Powdry, Dusty and Cracked Surfaces: Make good minor defects. For larger holes and cracks use sand and cement mixture. Allow the surface to dry. Prime the surface and then fill out any imperfections with Dulux Wall Smoothening Putty as described above. Scuff the surface using abrasive paper and dust off.

Cleaning
Clean all equipment with clean water immediately after use.

Storing
Store in dry conditions and protect from extreme temperatures.

Product description

accordion images

Dulux Interior Acrylic Putty (water based) is a ready to use filler that has an excellent whiteness, coverage and application properties.

Product Features

accordion images
High Coverage
Comfortable Application

Tips & Advice

accordion images
Preparing the Surfaces
New or Bare Surfaces: New surfaces must be clean, dry, free from all defective or poorly adhering material. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Treat any area affected by mould, lichens, algae or moss with bleach. After priming new surfaces with Dulux Prime On, dry over night, fill the surface with Dulux Wall Smoothening Putty. Allow the filler to dry for 2-3 hours and apply second coat of Putty. Third coat is not recommended for extra smoothness. Dulux Wall Smoothening Putty can also be applied directly on new unpainted surfaces. Third coat is recommended for extra smoothness. For best results apply one coat of prime-on again over wall putty and dry overnight. Previously Painted Surface: Remove all loose, defective paint and powdery residues by thorough brushing or scraping using a stiff fibre brush and dust off. Smooth surface with Dulux Wall Smoothening Putty as described above if required. Powdry, Dusty and Cracked Surfaces: Make good minor defects. For larger holes and cracks use sand and cement mixture. Allow the surface to dry. Prime the surface and then fill out any imperfections with Dulux Wall Smoothening Putty as described above. Scuff the surface using abrasive paper and dust off.

Cleaning
Clean all equipment with clean water immediately after use.

Storing
Store in dry conditions and protect from extreme temperatures.

Health & safety

Hazard warnings
Keep out of reach of children. Keep away from sources of ignition. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher. Never use water.Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. When applying paint it is advisable to wear eye protection and suitable gloves. In case of contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation. Repeated exposure may cause skin dryness or cracking. When using inside, always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. Harmful if swallowed; seek medical advice. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Do not breathe vapour or sanding dust as product is toxic by inhalation. If inhalation causes physical discomfort, move to fresh air. If discomfort persists or any breathing difficulty occurs, seek medical advice and show container label. Care must be taken when transporting paint. Do not store by hanging on a hook. Protect from extreme temperatures. Store in a cool and dry place. In an event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses as product is very toxic to aquatic organisms and may cause long term adverse effects in the aquatic environment. Dispose off any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. The container is only for paint use.
Add some colour to your feed
  • Facebook Facebook
  • Instagram Instagram
  • Youtube Youtube
Dulux Toggle Accordion
  • About Dulux
  • Contact Us
  • Find a Dulux store
  • Sitemap
Popular categories Toggle Accordion
  • Colours
  • Products
  • Decoration Ideas
  • Expert Help
  • Colour of the Year
Access Toggle Accordion
  • Accessibility
  • Colour Accuracy
  • Dulux
  • Cookies
  • Legal
  • Privacy policy
  • Other AkzoNobel websites
Copyright © 2021 AkzoNobel Paints AkzoNobel

Thanks

for registering

We will send you colourful news every now and then

newsletter

Thanks!

Our latest tips and inspirations are on their way to your mailbox

What does this mean?

What does this mean?

What does this mean?

For contacting you with personalized commercial messages, we will create profiles and analyse your interactions with us. For this, we will look at your personal data such as:

  • your name, gender, date of birth, e-mail address, and physical address;

  • your preferences and interests, such as those that you have actively shared with us, but also those inferred through your registered interactions with AkzoNobel websites and apps (for which we may use cookies);

  • your shopping history, both online (if you link your purchases to your profile) and offline (when making an offline purchase) ; and

  • the links you click in our emails.

This way we learn about your interests and can ensure that we provide you with the information and promotions that are of most interest to you. We may also ask you for your opinion about our products and services.

If you don’t want to receive any more messages or if you want to opt-out of a particular form of communication with us (for example text messages, e-mail or regular mail), just, follow the steps in that particular communication.

For further information, please read our full Privacy Statement.