Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Connect with email
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Forgotten your password?
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
If you have concerns about your privacy?
Read our Privacy Policy.

Dulux Interior Acrylic Primer
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt
-
Coverage 16-18 m2/L
-
Drying Time 2-3 Hours (Dependant on temperature and humidity)
Recoat after 2-3 hours -
Coats 1
-
Superior Adhesion
-
Enhances Topcoat Opacity
-
Alkali Resistant
-
Reinforces Adhesion and Durability of the End Coat
-
Quick Drying
Product Description
Dulux Interior Acrylic Primer is premium quality, acrylic based primer suitable for all types of interior masonry surfaces such as brickwork, plaster, & cement rendering. The primer provides excellent alkali resistence, improves adhesion of topcoats, and binds powdery residue, resulting in uniform surface for putty and topcoat application
Application Description
Apply one coat of Aqua Prime and dry for 2-3 hours.
Health & Safety
Keep out of reach of children. Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. Repeated exposure may cause skin dryness or cracking. When applying paint it is advisable to wear eye protection and suitable gloves. In case of contact with eyes, rinse immediately with plenty of water keeping eyelids apart and seek immediate medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation. When using inside, always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. Harmful if swallowed; seek medical advice. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Do not breathe vapour or sanding dust. Toxic by inhalation. If inhalation causes physical discomfort, move to fresh air. If discomfort persists or any breathing difficulty occurs, seek medical advice and show container label. Care must be taken when transporting paint. Do not store by hanging on a hook. Protect from extremes of temperature. Store in a cool and dry place. In the event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses. Very toxic to aquatic organisms. May cause long term adverse effects in the aquatic environment. Dispose off any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. The paint container is only for paint use. Keep away from sources of ignition. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher. Never use water. No smoking.
Tips & Advice
-
1. Preparing the SurfacesNew or Bare Surfaces:
New surfaces must be clean, dry, and free from all defective or poorly adhering material. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Treat any area affected by mould, lichens, algae or moss with bleach. After priming new surfaces with Dulux Aqua Prime, fill the surface with Dulux Wall Putty. Please refer to PDS of Dulux Wall Putty for correct application procedure and drying time properties. For best results apply one coat of Aqua Prime again over wall putty.
Previously Painted Surface:
Remove all loose, defective paint and powdery residues by thorough brushing or scraping using a stiff fibre brush and dust off. Smooth surface with Dulux wall putty as described above if required.
Powdry, Dusty and Cracked surfaces:
Make good minor defects. For larger holes and cracks use sand and cement mixture. Allow the surface to dry. Prime the surface with Dulux Aqua Prime and then fill out any imperfections with Dulux wall smoothening putty as described above. Scuff the surface using abrasive paper and dust off. -
2. CleaningRemove primer from the brush or roller with a cloth and then wash with water.
-
3. StoringStore in dry conditions and protect from extreme temperatures.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator