Latest Covid-19 Ordering, Delivery & Service status updates here.

Dulux EasyCare

Paint Calculator
This product is currently unavailable online. Please visit your nearest store.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 13-15m2 /litre /coat.
  • Drying Time 2-3 Hours
  • Coats 3
Product Features
  • Stain Resistant
  • Anti-Bacterial
  • Easy To Clean & Washable
  • Colour Fastness
  • Smooth Finish

Product Description

Dulux EasyCare is an acrylic water based paint suitable for all types of interior masonry surfaces. Kidproof+ Technology provides tough stain resistance making wall easy to clean without damaging the paint layer. With Anti-bacterial properties Dulux EasyCare also inhibits the growth of bacteria on your interior walls.

Application Description

Apply 3-4 coats of Dulux EasyCare and leave for 2-3 hours between coats.

Health & Safety

Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Wear eye/ hand protection. Do not breathe vapors/spray. Use only in well-ventilated areas. Remove as much paints as possible from brushes and rollers before cleaning. Avoid release to the environment. Collect spillage. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Do not empty into water course. Safety data sheet available for professional/ user on request.Hazard Statements May cause an allergic skin reaction. Toxic to aquatic life with long lasting effects. Precautionary Statements Keep out of reach of children. If medical advice is needed, have product container or label at hand. Do not get in eyes, on skin, or on clothing. Call a POISON CENTER or doctor if you feel unwell. Dispose of contents and container in accordance with all local, regional, national or international regulations.

Tips & Advice

  • 1. Preparing the Surfaces
    New surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. Treat any area affected by mould, lichens, algae or moss with bleach. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dust off. After priming new surfaces with Dulux Aquaprime, fill the surface with Dulux Wall Putty. Please refer to PDS of Dulux Wall Putty for correct application procedure and drying time properties. Third coat of Dulux wall putty can be applied for extra smoothness. For best results apply one coat of Dulux Aquaprime again over wall putty and dry overnight. Repair minor defects in the wall using sand whereas for larger holes and cracks use cement mix. Allow the surface drying time. Prime surface with Dulux Aquaprime and then fill any surface imperfections with the Dulux Wall Putty. Scuff surface using abrasive paper and dust off.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use
  • 3. Storing
    Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorized access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.