Dulux Ambiance Velvet Touch Velvet Silver

Inspired by smooth and sleek fabric, drape your walls with a luxurious silk finish to give them a timeless look and feel.
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Featured Finishes
  • Coverage 5-6 m2 per liter per coat
  • Drying Time 4-6 Hours
  • Coats 2
Product Features
  • Delivers a Touch of Luxurious Fabrics

Product Description

Dulux Velvet Touch Silk Silver is an acrylic based interior premium quality paint which is a part of our special effects range. It is inspired by the smoothest fabrics of Persia & delivers a luxurious fabric finish to your walls for a timeless touch. Velvet Touch Silk is available in selected tintable Dulux colours and offers a range of trendy shades. It is recommended for interior use only.

Application Description

After surface preparation apply 2-3 coats of Dulux Velvet Touch base coat in the recommended colour. Ensure 3-4 hours for drying between successive coats. Then apply the first coat of Velvet Touch Silk Silver in required colour with roller and then use trowel to smoothen out the paint. Ensure four to six hours for drying between each coat. For the second coat, apply a thin layer of paint in waves by trowel. Please refer to the product brochure or visit our website for the detail application procedure instructions or the demo video for the best results. It is advisable to carry out small scale trials before application over large surface area. Ensure a slight overlap of sections while working to avoid demarcations of the finish. Avoid windy conditions in the room. Room temperature should ideally be between 20°C to 35°C. Very hot and dry conditions are to be avoided. Use of any other paint apart from specially formulated Dulux Velvet Touch may deviate the desired finish and make it hard to recondition. Contains no added lead or mercury. STIR THOROUGHLY BEFORE USE

Health & Safety

Keep out of the reach of children. Do not breathe solvent vapour/spray. Use only in well ventilated areas. Safety data sheet available for professional user on request. Avoid contact with skin or eyes. If swallowed seek medical advice immediately and show this container or label. Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Do not empty into drains. Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Dispose of used container in compliance with local regulation.

Tips & Advice

  • 1. Preparing the Surfaces
    New or bare surfaces must be clean, dry and free from efflorescent salts. Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fiber brush and dust off. Treat any areas affected by mould, lichens, algae & moss with bleach. After priming new surfaces with Dulux Aqua Prime, fill the surface with Dulux Wall Putty. Apply primer on a wall putty before application of topcoat. Previously Painted Sound Surfaces: Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fiber brush and dust off. Spot prime and fill the surface as described above if required.
    Powdery, Dusty and Cracked Surfaces: Make good minor defects. For larger holes and cracks, use sand and cement mixture. Allow the surface to dry. Prepare surface as described above.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use
  • 3. Storing
    Store paint in dry conditions and protect from extreme temperatures. Container must be in a secure, upright position and be tightly closed.
Fetching the data, please wait...