Dulux Ambiance Velvet Touch Metallic Bronze

Inspired by lustrous effects, bring cool metallic tones to your rooms.
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Featured Finishes
  • Coverage 8-9 m2 per liter per coat
  • Drying Time 4-5 Hours
  • Coats 2
Product Features
  • Pure Metallic Finish

Product Description

Dulux Velvet Touch Metallic Bronze is an acrylic based interior premium quality paint. It is a part of Velvet Touch special effects range, designed to deliver wide variety of wall impacts with a unique metallic finish. It is recommended for interior use only.

Application Description

After surface preparation, apply 2-3 coats of Dulux Velvet Touch base coat in the recommended colour. Ensure 3-4 hours for drying between successive coats. Then apply two coats of Velvet Touch Metallic Bronze with roller or brush. Ensure four to five hours for drying between each coat. Please refer to the product brochure or visit our website for the detail application procedure instructions or the demo video for the best results. It is advisable to carry out small scale trials before application over large surface area. Ensure a slight overlap of sections while working to avoid demarcations of the finish. Avoid windy conditions in the room. Room temperature should ideally be between 20°C to 35°C. Very hot and dry conditions are to be avoided. Use of any other paint apart from specially formulated Dulux Velvet Touch may deviate the desired finish and make it hard to recondition. Contains no added lead or mercury.
STIR THOROUGHLY BEFORE USE "

Health & Safety

Keep out of the reach of children. Do not breathe solvent vapour/spray. Use only in well ventilated areas. Safety data sheet available for professional user on request. Avoid contact with skin or eyes. If swallowed seek medical advice immediately and show this container or label. Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Do not empty into drains. Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Dispose of used container in compliance with local regulation.

Tips & Advice

  • 1. Cleaning
    Clean all equipment with clean water immediately after use
  • 2. Storing
    Store paint in dry conditions and protect from extreme temperatures. Container must be in a secure, upright position and be tightly closed.
Fetching the data, please wait...