No Colour Selected
Select a colourPaintex Emulsion (Star)
Economical emulsion with smooth finish
Do you know the area?
Key Information
-
Finish Matt
-
Coverage ≈ 13 m²/L
-
Drying Time 2-3 Hours (Depending on temperature and humidity)
-
Coats 4
Product description
Paintex Emulsion Star is an economical emulsion with a smooth matt finish. Product has in-can redeemable coupon: Rs 75 in Gallon and Rs 300 in Bulk Pack
Tips & Advice
Preparing the Surfaces
New or Bare Surfaces:
New or bare surfaces must be clean, dry and free from efflorescent salts. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Treat any areas affected by mould, lichens, algae and moss with bleach. After priming new surfaces with ICI Paintex Ultraprime, dry over night, fill the surface with ICI Paintex putty. Please refer to PDS of ICI Paintex Ultraprime and ICI Paintex putty for correct application procedure and drying time properties. For best results a single coat of ICI Paintex Ultraprime over wall putty and dry overnight.
Previously Painted Surface:
Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Spot prime and fill the surface as describe above if required.
Powdery, dusty and cracked surface:
Make good minor defects. For larger holes and cracks use sand and cement mixture. Allow the surface to dry. Prime the surface and then fill any surface imperfections with ICI Paintex putty. For best results a single coat of ICI Paintex Ultraprime over wall putty and dry overnight.
Cleaning
Clean all equipment with clean water immediately after use
Storing
Store paint in dry conditions and protect from extreme temperatures.
Health & safety
Hazard warnings
Keep out of reach of children. Keep away from sources of ignition. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher. Never use water. Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. When applying paint it is advisable to wear eye protection and gloves. Repeated exposure may cause skin dryness or cracking. In case of contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation. When using inside, always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. The product is harmful if swallowed; seek medical advice. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Do not breathe vapour or sanding dust. The product is toxic by inhalation. If inhalation causes physical discomfort, move to fresh air. If discomfort persists or any breathing difficulty occurs, seek medical advice & show container label. Care must be taken when transporting paint. Do not store by hanging on a hook. Protect from extremes of temperature. Store in a cool and dry place. In the event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses as product is very toxic to aquatic organisms and may cause long term adverse effects in the aquatic environment. Dispose of any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. The product container is only for paint use.